TORNOS MultiSwiss 6 x 16 year 2019

TORNOS MultiSwiss 6×16 – CNC Multi-Spindle Automatic Lathe

Base machine

6 motorised main spindles, 5.5 kW each

Maximum main spindle speed 8,000 rpm

Spindle capacity Ø 16 mm

Maximum workpiece length 40 mm

Main spindle Z-axis travel 50 mm

6 X-axis slides with 40 mm travel each

1 backworking slide with 75 mm travel

Counter spindle with integrated 6 kW motor

Maximum counter-spindle speed 8,000 rpm

Counter-spindle travel 150 mm

Power supply 380–420 V, 50 Hz, ±5%

Signal lamp

CNC control and software

FANUC 30i with German-language operator interface

Integrated PC with 17-inch display

TB DECO programming system, DCS version, requires cabinet option 3003

Software package with remote servicing, machine warm-up and tool management

Operating manual in German

Bar feeder and bar advance

Bar length 1,500 mm

Bar diameter Ø 4–16 mm

Magazine capacity 40 or 175 bars, depending on diameter

Active hydraulic bar advance unit at position 1

Bar advance unit without F16 collet

Bar advance recommended from Ø 10 mm and required for Ø 12–16 mm

Bar advance unit requires option 273-0815

1 set of 6 clamping tubes Ø 12 mm (9–11 mm)

1 set of 6 reduction tubes Ø 12 mm (9–11 mm)

Reduction tubes selected according to bar diameter

Tooling

2 fixed front drilling units Ø 25 mm

ESX-16 collet with clamping capacity up to Ø 10 mm

Fixed drilling units for positions 2–5, require option 1200

1 driven front drilling unit in special configuration

Transmission ratio 1:2, with motor and collet holder

Through-centre coolant supply on the driven drilling unit

Electrical provision for drilling tools or polygon turning attachments, DCS version

Provision for 2 units at positions 3–5, incompatible with option 0001

1 electrical tool breakage probe, Middex WK2

Tool breakage detection at positions 1–5, maximum 1 tool per position

Maximum 3 probes per machine across options 4010 and 4020

1 set of tools and setup accessories

Parts discharge and chip removal

Pneumatic parts chute for workpieces up to 40 mm long

Maximum bar remnant length 70 mm

Coated parts chute in special configuration

Extension chute at the parts outlet

Plug connection for an external belt conveyor

Belt-type chip conveyor with transfer pump, incompatible with option 3100

Chip collection bin for the paper filter

Electrical cabinet, cooling and filtration

Electrical control cabinet, option 3003

Oil tank capacity 1,100 L

Coolant pump 100 L/min at 4 bar

50 µm paper filtration system

Central hydrostatic unit with 5 µm fine filter

Replacement cartridge for the 5 µm hydrostatic filter

Replacement cartridge for the 20 µm hydrostatic safety filter

Spare paper roll for the filtration system

Dual-circuit water-to-oil heat exchanger

Water supply required

High-pressure system

High-pressure pump unit 37 L/min at 80 bar

Pump unit requires option 3001 or 3003

Pump unit is incompatible with options 3010 and 3020

Rotating ejector with high-pressure flushing, listed in the specification

Ejector requires option 3010 or 3020

Combined pump and ejector configuration unconfirmed

Fire protection

KRAFT & BAUER CO₂ fire suppression system

Mechanical integration and software interface included

For use with a central extraction system

TORNOS recommends a fire damper in the extraction ductwork

Pneumatically actuated fire damper

Fire damper incompatible with options 3800 and 3802

Packaging

Machine packaging on wooden panels