BOEHRINGER VDF DUS 560 ti

CNC Cycle-Controlled / Universal Centre Lathe

General Data

Manufacturer: Boehringer Werkzeugmaschinen GmbH, Göppingen

Type: DUS 560 ti

Machine type: VDF universal centre lathe with programmable cycles

Year of manufacture: 1999

Control: Siemens SINUMERIK 810D

Operator interface: ManualTurn with cycle support

Processor: 32-bit

Display: 10.4" colour LCD display

Working Range

Max. swing diameter over bed: 570 mm

Max. swing diameter over carriage: 365 mm

Max. turning length: 1,500 mm

Centre height above flat guideway: 280 mm

Max. workpiece weight: 400 / 1,000 kg

Max. workpiece clamping length: 1,300 mm

Main Spindle

Spindle nose: DIN 55027, size 8

Internal taper: 70

Spindle bore: Ø 62 mm

Spindle diameter at front bearing: 100 mm

Spindle passage depth: 200 mm

Max. chuck diameter: Ø 315 mm

Spindle speed range: 3–2,500 rpm

Max. faceplate diameter: Ø 560 mm

Max. faceplate speed: 700 rpm

Max. torque: 1,800 Nm

Spindle Speed Ranges

Gear range I: 3–500 rpm

Gear range II: 15–2,500 rpm

Speed override: 50–120%

Carriage / Travel

Z-axis longitudinal travel: 1,160 mm

X-axis cross travel: 345 mm

X-axis feed rate: 0.01–5,000 mm/min

Z-axis feed rate: 0.01–10,000 mm/min

Automatic longitudinal and cross feed: 0.01–50 mm/rev

Feed override: 0–120%

Rapid traverse X-axis: 5 m/min

Rapid traverse Z-axis: 10 m/min

Max. feed force X-axis: 7,100 N

Max. feed force Z-axis: 12,500 N

Tooling System

Tooling system: PARAT 3

Tool cross-section according to DIN 770: 32 × 25 mm

Carriage / turret: Size 3

PARAT 4-position

Manually indexable through 4 × 90°

Additionally installed: Tripan tool post

Tools and tool holders are not included in the scope of supply.

Tailstock

Tailstock adjustment: manual

Quill taper: MT 5

Quill diameter: 80 mm

Quill travel: 190 mm

Main Drive

Main drive manufacturer: Siemens

Drive power: 20 / 30 kW

Main drive speed: 8,000 rpm

Protection class: IP55

Electrical Data

Operating voltage: 400 V

Frequency: 50 Hz

Coolant System

Coolant flow rate: 47 l/min

Coolant pressure: 0.2 bar

Chip conveyor with coolant tank and integrated pump.

Machine Dimensions and Weight

Length: approx. 4,980 mm

Width: approx. 2,100 mm

Height: approx. 1,980 mm

Machine weight: approx. 4,800 kg

Equipment / Scope of Supply

• Combined 4-jaw Westcott chuck with installed set of jaws
• 3-jaw chuck Ø 315 mm
• Faceplate Ø 350 mm
• Faceplates up to Ø 560 mm can be used for thin workpieces
• Tripan tool post
• Fixed steady rest
• PARAT 4-position turret
• Chip conveyor
• Coolant tank
• Integrated coolant pump
• Radius turning function
• Siemens SINUMERIK 810D
• ManualTurn with cycle support

Machining Capabilities

Conventional machining as well as NC machining with cycle support.

Suitable for workpieces within the specified machine capacity and travel ranges.

Documentation

Operating manual available.

Machine data sheet available.

Internal inspection / assessment report from 2017 available.

Machine Condition

According to information provided by the previous operator, the machine was in operation at the time of the latest operator report.

At that time, no significant defects or restrictions affecting the use of the machine were known.