DMG MORI NHX 5000 YEAR OF MAKE 2023

🏭 Machine

DMG MORI NHX 5000 3rd Generation

Type: Horizontal Machining Center

Travel (X / Y / Z): 730 / 730 / 880 mm

Pallet size: 500 × 500 mm

Pallet surface: Tapped holes (metric / inch)

Coolant system: Oil skimmer, water-glycol chiller (spindle cooling)

Measuring system: Renishaw OMP60 + workpiece setter

Full closed loop control (scale feedback)

⚙️ Control

Fanuc F31iB with CELOS (MAPPS V)

Operation panel: ERGOline Touch 21.5" multi-touch screen

Software: MAPPS / CELOS Control with IoTConnector, NETservice, MDC

Screen language: English

🔩 Spindle

High-speed spindle: 20,000 min⁻¹

Power output: 37 / 26 / 18.5 kW

Torque: 221 / 107 / 86.8 Nm

Spindle taper: HSK-A63

Cooling: Center through-spindle coolant system

Warranty: 3 years (MASTER spindle series)

🔄 Table

B-Axis: Full rotary (Direct Drive motor)

Minimum indexing angle: 0.001°

Drive system: Direct drive motor

Clamping: Hydraulic (disc brake)

Max. rotation speed: 100 min⁻¹

🧰 Tool Magazine

Tool capacity: 120 tools (HSK-A63)

Tool diameter:

• With adjacent tools: Ø70 mm
• Without adjacent tools: Ø140 mm
• Max. tool length: 450 mm (NHX4000) / 550 mm (NHX5000)
• Max. tool weight: 12 kg
• Max. tool moment: 7.84 Nm

💧 Coolant Supply / Chip Removal

Coolant type: Water-soluble coolant

(Use oil-based specification when using oil coolant)

Chip conveyor: Drum filter type, rear discharge

Tank capacity:

• NHX5000: 1,025 L
• Tank depth: 400 mm

📏 Measuring / Monitoring

• In-machine measuring system: Spindle touch sensor (Renishaw OMP60)
• Tool Setter Function: Tool length and diameter measurement
• Tool breakage detection system
• Magnescale table touch sensor

⚡ Electrical Specification

Factory voltage: 380 V (machine shipped at 200 V → transformer required)

Frequency: 50 Hz

🤖 Automation

• Signal lamp: 4 colors (Red, Yellow, Green, Blue)
• Automatic door (setup station side)
• Robot interface (EtherNet/IP)
• Through-spindle coolant interface (7.0 MPa, variable pressure steps)